CATALINA CHEMICAL SEALERS
Products available in the following quantities: quart, 1 gallon, 5 gallon, or 55 gallon drum
AGG Sealer 888 is a solvent based, interior or exterior, high gloss, acrylic sealer. Formulated to efficiently seal rough or porous surfaces such as Mexican Saltillo, deep wire-cut brick pavers, exposed aggregate, stone, and all other rough or porous cementitious tiles or materials. Designed to resist fading or discoloring from UV rays, and will maintain gloss for long periods of time when applied to exterior surfaces. Use when a high gloss is desired. Gloss will increase as additional coats are added.
MAGIC is a deep penetrating, siloxane water repellant which provides a virtually invisible below surface seal. This sealer is vapor permeable and does not form a surface film. It internally seals and waterproofs the substrate, which allows moisture to breathe out of the stone, while preventing moisture and dirt from penetrating the surface. Will not alter the appearance of the stone. MAGIC: preserves original beauty of the surface, inhibits efflorescence, penetrates deeply and immediately, and is an excellent grout release. Use when a natural look is desired. For interior or exterior use. Designed for use on Brick, Brick Pavers, Unglazed Ceramic Tile, Clay Tiles, European Clay Pavers, Concrete, Grout Joints, Saltillo Tiles, Travertine, Marble, and any stone surface where no gloss is desired.
PLUS is a clear, penetrating, water and oil repellant. Ideal for long term protection against food, oil, and water stains. PLUS dries clear and non-glossy and does not form a surface film. Treated surfaces retain a natural appearance. PLUS: preserves original beauty of the surface, inhibits efflorescence, penetrates deeply and immediately, and is an excellent grout release. Use on any stone surface when a natural look is desired. For interior or exterior use. FOR USE ON: Flagstone, Shell or Fossil Stone, Limestone, Quarry Tile, Slate, Keystone, Brick, Brick Pavers, Unglazed Ceramic Tile, Clay Tiles, European Clay Pavers, Concrete, Grout Joints, Saltillo Tiles, and any stone surface where no gloss is desired.
TERATONE 467 is a color enhancing, slow drying, deep penetrating, solvent based acrylic sealer for interior or exterior use. TERATONE’s slow drying nature allows it to penetrate deep before setting. Will enhance the natural colors of most surfaces, while protecting surfaces from UV rays and harsh weather. Very effective at sealing and protecting dense and smooth surfaces such as quarry tile, ceramic tile, slate, unfinished marble, terrazzo, travertine, smooth cement, and all other cementitious materials. Recommended for use on surfaces when NO gloss or a SATIN finish is desired.
ULTIMATE 466 is a solvent based, high gloss, acrylic sealer. Designed to resist fading or discoloring and maintain a gloss/wet look for long periods of time. Use when a high gloss or wet look is desired. For interior or exterior use. Designed to use on smooth or semi smooth floor surfaces such as quarry tile, unglazed ceramic tile, terrazzo, travertine, smooth concrete, or any other fairly smooth cementitious surface. Will not fade, discolor, crack, or peel when exposed to the weather.
SLATE & QUARRY No. 468 is a solvent based, high gloss, acrylic sealer designed for slate or quarry tile. Formulated to prevent moisture and dirt from penetrating the surface. Designed to resist fading or discoloration, and will maintain a wet look for long periods of time when exposed to the elements. Use when a high gloss or wet look is desired. For interior or exterior use.
SEALER 444 is a milky white, light viscosity, high solids, non-toxic, water-based sealer, that dries to a very tough, slip resistant, and clear glossy finish. SEALER 444 will protect surfaces from dirt, moisture, and UV rays, while protecting from fading or discoloration. 444 releases no toxic fumes, safe and easy to use when being applied in enclosed areas.
Use when a high gloss or wet look is desired. For interior or exterior use. Designed for use on Mexican, Spanish or Brazilian tile, wire cut brick pavers, travertine, stone and exposed aggregates.
BLOCK OUT is a water-based siloxane water repellant grout sealer that dries to a virtually invisible film to seal out water, dirt, and most common stains. Formulated to efficiently seal grout moisture and dirt from penetrating the surface. Non-toxic, safe and easy to use when being applied in enclosed areas.
TOP KOTE is a self-polishing floor finish formulated to be used over most sealers to help protect them from wear. Top Kote dries to a crystal clear, scuff and heel mark resistant coating. Used to maintain the floors in normal maintenance. Top Kote will add a gloss to most flooring surfaces.
Polishes and maintains: Mexican Saltillo, Glazed Rough Floor Tile, Travertine, Quarry Tile, Slate, Smooth Brick Pavers.
DIRECTIONS: TOP KOTE is designed to be applied over most sealers to achieve a gloss and help protect the surface.
TOP KOTE is always applied on a CLEAN & DRY surface.
Clean tiles with Catalina Chemical- Neutral Cleaner. Rinse surface with clear water. Let surface dry.
Pour ample amount of TOP KOTE into a clean pail or bucket. Soak a clean, lint free cotton or rayon mop with the finish. Squeeze the ends of the mop to eliminate excessive dripping. Spread TOP KOTE to the surface evenly, smoothly, and uniformly, with strokes from left to right, or right to left, overlapping each stroke. Let the weight of the mop apply the finish. Reload the mop with finish as needed. Do not leave puddles or voids. Work systematically and in small areas at a time.
A second or third coat of TOP KOTE may be applied, depending on the amount of gloss desired. ALLOW 30 minutes to an hour drying time between coats.
CATALINA CHEMICAL STONE MAINTENANCE
MER-MAID is a mild acidic cleaner. Very effective at removing lime, calcium, and hard water stains. Not to be used on calciferous stone such as marble, travertine, or limestone. MER-MAID is great for cleaning toilets, tubs, shower baths, tile, drain boards, porcelain, wash basins, sinks, and urinals. Safe on enamelware and porcelain when used as directed.
DIRECTIONS: For bath tubs, shower stalls, porcelain tile, sinks: Apply MER-MAID to applicator and swab the entire area.
For toilet bowls: Lower water level with plunger, apply MER-MAID to applicator and swab entire area. Flush. Rinse area and applicator.
For enamelware: USE CAUTION. Dilute MER-MAID with one-part water and apply with applicator swab. Rinse area thoroughly immediately.
CAUTION: ALWAYS TEST PRODUCT ON 1-2 PIECES OF MATERIAL BEFORE STARTING THE ACTUAL JOB.
WARNING: CONTAINS MILD ACID
NEUTRAL CLEANER is a neutral pH cleaner for use on any type of surface. Neutral Cleaner does not contain abrasive ingredients, so it will not damage the glossiness of polished or painted surfaces. Used in place of high alkaline cleaners when a high alkaline pH becomes a factor. Designed to clean and maintain Terra Cotta Tiles, Terrazzo floors or any other type flooring. Well suited on Marble, Travertine, Quarry Tile, Brick Pavers, Slate, Stone, Concrete, Mexican Saltillo, Granite, Asphalt, Vinyl, and Rubber Tiles.
CAN BE USED ON ANY SURFACE NOT HARMED BY WATER.
FOR CLEANING ALL TYPES OF FLOORS: Add ½ cup Neutral Cleaner Concentrate to a pail of hot or cold water, and damp mop in the usual manner. If floor is unusually dirty, let solution soak loose dirt, then pick up dirty solution, rinse, and let dry.
FOR RECONDITIONING EXTREMELY ABUSED FLOORS: Add 1 ½ - 2 cups of Neutral Cleaner Concentrate to pail of water. Apply liberally to the surface and let stand a few minutes. Machine scrub until the surface is clean. Rinse well and let dry. Floor is now ready for refinishing.
FOR CLEANING ANY SURFACE: Walls, word work, marble, blinds, etc. Add Neutral Cleaner Concentrate to bucket of water, apply with sponge in a small area at one time. Rinse with sponge and clean water.
MOP-OFF is a high-performance, highly concentrated, wax and finish stripper. MOP-OFF will easily remove undesirable layers of wax or finish with minimal effort. It has no offensive ammonia odors, and works quickly and efficiently. In most cases, the use of a floor machine is not necessary. MOP-OFF is low foaming, therefore accelerating the rinsing operation. Works in hot or cold water.
FOR HEAVY BUILDUP: Use 1-part MOP-OFF to 1-part water.
FOR MODERATE BUILDUP: Use 1-part MOP-OFF to 5 parts of water.
FOR MILD BUILDUP: Use 1-part MOP-OFF to 8-10 parts water.
Mop floor using one of the above solutions. Apply liberally and allow to stand 5 to 10 minutes, making sure the solution stays wet. Pick up dissolved solution with mop or wet-dry vacuum. After floor is thoroughly cleaned, rinse with clear water. Allow floor to completely dry before applying floor finish.
DESCRIPTIONS: SUPER BRITE is a biodegradable cleaner that restores the look of ceramic tile and white grout.
DIRECTIONS: Dilute 6 oz. to 1-quart water. Apply directly to the grout or ceramic tile. Scrub briskly with nylon brush, rinse or mop thoroughly with clean water, wipe dry. GROUT WILL APPEAR WHITE AFTER IT DRIES.
RECOMMENDED FOR WHITE GROUT ONLY! GROUT WILL BE WHITE AFTER APPLICATION.
SKIP CLEANER: An all-purpose cleaner great for tough jobs. It’s a great cleaner for concrete, driveways, and patios, or any place where stains from soil, oil, or grease present a problem. Great at removing deep stains.
SKIP POLISH Deep luster polish made with a combination of tough, durable, polyethylene resins which seals the pores of any floor and keeps stains and soil from penetrating. Skip Polish provides a shiny, long lasting coating.